ADVERTISEMENT
How do you unclog a bathtub full of hair?
These three prevention methods should normally prevent the problem of clogged drains. However, even with all precautions, it is sometimes difficult to get around hair buildup. In this case, if you are faced with a water flow that is too slow, there are other home solutions to try, without calling a professional.
- Clean the cap
If the tub is clogged with too many bristles, remove the filter or cap and clean it. You can use a standard screwdriver or simply pry it up using your nails. From there, you will be able to remove any accumulated hair more easily. After that, run the boiling water down the drain and see if it is smoother now.
- Use a drain claw to unclog loose hair
Is it still a little clogged? Ok, then opt for the “drain claw”, a very recent plumbing tool that is proving to be very effective. Featuring an auger attached to its end, this claw helps unclog any clogged substance inside the drain pipe. Because it is flexible, it can be easily bent to fit any clogged drain. This will allow you to grab the clump of hair that is causing the blockage.
- Use a chemical drain cleaner
Of course, if you want, you can still use chemical drain cleaners to more easily fix the problem. Online, you will find the steps to follow to apply these commercial drain cleaners. However, there are some precautions to take: do not use any chemical product without wearing safety gloves and, above all, follow the instruction manual carefully. After pouring the product down the drain, wait approximately 10 to 15 minutes for the drain cleaner to work. After this time, pour hot water into the drain and check if it works properly. If it is still clogged, repeat until you get the desired result. But be careful, it is best to avoid overusing chemical cleaners in drains, as they can damage your home’s drainage system.
- Apply a natural drain cleaner
And why not opt for a homemade drain cleaner? They are also powerful, fruitful and safer. The perfect duo? So rely on baking soda and white vinegar to unclog your shower or bathtub drain. How to apply this solution? First, pour boiling water down the tub drain to soften it. Then add 1/2 cup of baking soda and a cup of vinegar. Leave them on for 10-15 minutes. Then, check if the drain has been cleaned and unblocked perfectly. If not, repeat again. You’ll see, you’ll be very satisfied! In fact, it is recommended to use this natural remedy at least once a month to avoid unusual drain blockages at home.
- Use a plunger
Finally, the plunger is a basic tool that plumbers usually use to unclog drains. It consists of a rubber cup attached to the top of a long handle: it is a very practical tool for cleaning blocked drain pipes, using water pressure. How to proceed? First fill the tub with hot water and place the plunger over the clogged drain. Squeeze and pull. Repeat the process several times until the hairs are completely removed inside. With this method, you should end up completely unclogging the tub drain.
ADVERTISEMENT