ADVERTISEMENT
We began by combining one part bleach with one part water, and then we included the mixture in a spray bottle. In addition, we made sure to wear rubber gloves, goggles, and a face mask while we worked. At last, we grab a brush, spritz it with water, and aggressively massage it.
The fragrance is so potent that it may even induce dizziness, therefore we need to be patient since it will take some time. We need to do it a little bit every day or week because it is so powerful. Another precaution that we have to take is to carry out this activity in an atmosphere that is highly open and free of interruptions from other people.
The use of chlorine bleach on colored walls will cause the color to fade, which is a significant advice as well. As a result, this is a piece of advice that is best suited for white surfaces and walls.
Utilizing hydrogen peroxide, mold may be removed.
Hydrogen peroxide is yet another product choice that may assist in the removal of mold; nonetheless, it is recommended that it be used for the removal of tiny spots since it demands a little bit more effort.
The process consists of soaking a cloth in hydrogen peroxide, applying it to the mold so that it is moist, and allowing it to work for fifteen minutes. Then, we give it a thorough massage till it comes out.
You are required to wear gloves and a protective mask when working with this product, and you must also ensure that the surroundings is well ventilated.
It is very forbidden for youngsters to enter the room when the treatment is being performed.
Mould may be removed with just water, vinegar, and alcohol.
There is a simpler way that may be used to create a combination that is more handmade and does not alter the color of the wall.
It is possible to combine one cup of vinegar and one cup of alcohol with one cup of warm water. If they are combined and well mixed, they will be able to soften the mold, which will remove the discoloration and make cleaning easier.
Frees humidity from the air The structure is being corrected.
It would be important for us to seek for additional remedies if we want to permanently get rid of the mold and humidity that are that are present in the property. In this regard, it is of the utmost importance to seek the guidance of a qualified individual, who will assess the construction of the home and assist us in determining the most appropriate solution.
Following the identification of the underlying reason, the remedy will be implemented, which will often include removing the existing cast and performing a new one. In this particular instance, a liquid that is waterproofing will be included into the new plaster mixture.
When the issue originates from below, it may be required to pull down the first meter of wall and repair that section of the wall with the addition of a waterproofing mat. This solution may be essential in some circumstances.
Continued on next page
ADVERTISEMENT
